Yep, oil change reminder light. While pressing the trip meter reset button, turn the ignition on. Yellow icons indicate an item of importance such as low fuel , but are not necessarily a warning. Waldrop Are you sure it is the maintenance required light? Due: Description: 5,000 Miles 3 items to Inspect, 1 item to Rotate 10,000 Miles 3 items to Inspect, 1 item to Rotate, 1 item to Replace, 1 item to Change fluid 15,000 Miles 12 items to Inspect, 1 item to Rotate, 1 item to Inspect fluid level 20,000 Miles 3 items to Inspect, 1 item to Rotate, 1 item to Replace, 1 item to Change fluid 25,000 Miles 3 items to Inspect, 1 item to Rotate 30,000 Miles 17 items to Inspect, 1 item to Rotate, 3 items to Replace, 1 item to Change fluid, 4 items to Inspec. The maintenance light is supposed to come on at 4500 mile intervals and blinks then turns off every time you turn on the truck for the next 500 miles and at 5000 miles it will stay on meaning that is when the oil change is due and so on for every 4500-5000 miles from the times it is reset.
As I stated, I know how to reset it when it stays on. Turn the ignition off and then start the engine to verify the indicator has been reset. Vehicles with smart key system: 3. Ensure Trip metre A reading is shown. Vehicles without smart key system: 3. You must re-perform the procedure You seem a little skeptical. After performing the oil change the oil change indicator will need to be reset.
In no way does onvacations. Dashboard icons are displayed in a variety of colors, depending on the system and its status in a specific vehicle. I have a 2016 corolla and I did this and all I did was reset my trip A mileage. Using the Multi-Info Display When doing the oil change and topping up fluids you will need to use the following specifications: Engine Size 2. How do I reset the Maint Reqd light in a Toyota? Specifically, I held the button down that switches the display to Trip A, then, with my foot off the brake pedal, I pushed the ignition button. But the only thing that reset was my trip A mileage. You should see numerous dashed lines in a ------ counting down.
All-New Toyota Corolla Altis 2014 will be the 11th generation that comes with a new look and more refreshed after the All-New Vios 11th generation All-New Corolla Altis comes with Keen Look design that became the Toyota design language that has started from the Vios. If your browse the forum I think you will find many interesting videos and topics of discussion. Turn the key to On, not Start! Turn the ignition to run one position before starting engine. I change all the oil regular and this is missing me. I don't know if it's in the manual and I don't have mine handy.
Do not crank the vehicle. If it is in the owners man, I would invite someone to kindly tell me what page it is on. The reset can be performed by following these instructions: 1. Everyone has their personal prefrences how they treat their cars. Only thing I can think of is that it came on a little while after I hit 36,000 miles. Dashboard icons are displayed in a variety of colors, depending on the system and its status in a specific vehicle. Have you changed the oil yourself in the past or had a shop do it? No offense, just making sure cause some people have made this mistake.
After passing through several decades of innovation certainly has grown considerably compared to the first generation. You should be able to. If it is in the owners man, I would invite someone to kindly tell me what page it is on. The Japanese company is seductive in its website that the new Tacoma will be supported by an unshakable legacy of capacity. Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Unfortunately not described in detail. Once the lines disappear, you'll see 00000, then back to the odometer and your light should go off. How To Reset Maint Reqd Light on 2009-2014 Toyota Corolla — Toyota Corolla compact sedan is the most desirable cars in the world, since first appearing in 1966, this car has achieved record sales of more than 30 million units worldwide. Hold the position for five seconds and turn the ignition key off. They might have kept it out so you'd have to drive to the stealership and they could scam you into services you don't need.
Also do check, with your scheduled maintenance if you do general, or severe. I took it in to the shop at 35,400 so thry could do any work that might fall under the warranty before it ran out. The maintenance light will be reset and will illuminate again the next time service is due. You can cross reference the following Purolator filter numbers for your own application: Engine Size 2. See your vehicle's Owner's Manual for more details.
All fluids and filters are fine. These instructions worked fine for my 2012 Tacoma. In this case is blinks 6 times upon engine start. Different in terms of design, dimensions slightly larger, more luxurious and most importantly, more environmentally friendly engine performance. It the Maint Req'd would stay on, I would know that the oil needs to be changed and for that matter, I know how to reset it when that happens. I want to reset it so that if there is ever a warranty claim, the computer will say she maintained the car well. HugoFirst answered 3 years ago Are you sure? I'm pretty sure you wouldn't get a code for a maintence light, but the check engine light would definately throw some codes.